EcoStore 200Ah 12.8V LiFePO4 Battery - (EVE Cells) & (Bluetooth BMS - JBD)

Introducing the EcoStore 200Ah

Developed from decades of innovation and tested in real-world conditions, the EcoStore 200 isn't just an upgrade—it's a significant advancement in lithium battery technology. Compared to traditional Li-ion batteries, the ES200 has enhanced energy density, improved safety, faster charging times, a longer lifespan, and its compact design ensures easy integration into a variety of systems. These features make the EcoStore 200 the top choice for critical applications where performance and dependability are paramount.

Power with peace of mind

Our EcoStore 200 features Grade A EVE prismatic cell technology and a robust 200Ah Hardware-Controlled Battery Management System. This setup enhances safety and provides comprehensive protection against common battery issues such as overcharging, overdischarging, overheating, or short circuits. With this battery, you can expect stellar performance and durability, even in tough conditions.

Type of Battery: Lithium-Iron Phosphate (LiFePO4)

Standard Voltage: 12.8V

Usable Capacity: 200Ah (2560Wh)

Cycle Life: 5000 @ 80% DoD

Charging Cut-Off Voltage: 14.8±0.2V

Discharge Cut-Off Voltage: 9.0±0.2V

Over-Charge Recovery Voltage: 14±0.2V or Discharge ≥ 2A

Over-Discharge Recovery Voltage: 10.8±0.2V or Charge ≥ 2A

Recommended Charging: Current: Up to 100A

Max. Continous Charging: Current 200A (1C)

Max. Continous Discharging: Current 200A (1C)

Peak Discharge Rate (3s): 600A (3C)

Battery Pack Assembly Method: 4S2P

Cell Type: EVE Grade A 3.2V 100Ah LFP Prismatic Cell

BMS Brand: JBD Smart Programmable BMS

Charging Type: CC/CV

Charging Temperature: -10 ~ 65°C

Discharging Temperature: -10 ~ 65°C

Charging Temp Protection: ≥65±5℃

Discharging Temp Protection: ≥75±5℃

Maximum Battery Connectivity: Unlimited in Parallel/Four in Series

Input/Output Port Type: M8

Dimensions: 490x170x250mm

Weight: 19.5KG

Case Material: ABS

Ip Rating: IP67

Certifications: IEC62619/UL1642A/UN38.3/ROHS

Warranty: 5 Year Full Replacement Warranty

Bluetooth BMS: Yes, via EcoWatt Energy Connect app

What is an A-Grade Cell?

An A-Grade Cell refers to a battery cell that meets the highest standards of quality and performance. These cells are rigorously tested and graded based on their capacity, voltage, and overall reliability. At EcoWatt, we meticulously select only the highest quality A-Grade Cells to ensure superior cycle life, consistent performance, longer lifespan, and greater safety compared to lower-grade cells, making them the top choice for premium battery products.

How do I use the Bluetooth Monitoring Feature?

To use the Bluetooth Monitoring Feature, first download the EcoWatt Energy Connect app from the Apple App Store or Google Play Store. Then, open the app, connect to your battery, and start monitoring.

My Charger says the battery is fully charged, but the app is not showing 100% charge, why?

Sometimes, the State of Charge (SOC) display on the app may not be fully accurate until the battery has gone through a few full charge and discharge cycles. The BMS needs time to 'learn' the battery’s parameters and adjust accordingly before the Bluetooth monitoring provides precise readings.

What are your Recommended Charger/Shunt Settings?

• Charged voltage: Around 13.5V, but you can double-check this once the battery is fully charged.
• Bulk charging voltage: Between 14.4V to 14.6V
• Absorption voltage: Between 14.4V to 14.6V
• Float voltage: Around 13.5V
• Storage voltage: Similar to the charged voltage; 13.5V
• Discharge floor: It can be set above 20%. This setting is more about your personal preference for the charger than the battery. The higher this percentage, the better. We don't recommend going below 20%.
• Tail current: Anywhere between 2-4% is fine. Once the charging current drops below this range, the battery is nearly fully charged.
• Peukert exponent: This is mostly relevant for lead-acid batteries. For LiFePO4, setting it to 1.05 is standard
• Charge efficiency factor: Set this to 99%
• Current threshold: 0.1A
• Charge detection and Time to go averaging period: These can remain unchanged
• State of charge (SOC) synchronization: We recommend synchronizing the SOC to 100% once you've fully charged the battery

Can I use the EcoStore 200 under the bonnet?

No, it is not recommended to use the EcoStore 200 under the bonnet. We advise against using our LiFePO4 batteries for under bonnet applications due to their lower thermal tolerance compared to other battery types, such as lead-acid or AGM. The engine compartment can reach high temperatures, particularly in demanding conditions or during extended use, which can degrade the battery's performance, lifespan, and safety.

Long-Lasting Cycle Life

With a cycle life of over 5000 cycles, the EcoStore 200 is engineered to deliver consistent power without the worry of frequent replacements, making it a dependable choice for all your energy needs.

EVE A-Grade Cells

Experience the highest standard of energy storage with the EcoStore 200. Crafted with A-Grade cells, this battery provides maximum reliability and durability, making it a dependable choice for both everyday use and demanding applications.

Ultra-Compact Design

Maximize your storage space with the EcoStore 200's ultra-compact design. Perfect for tight spaces, this battery delivers powerful performance without compromising on space, making it an ideal choice for RVs, boats, and off-grid systems where every inch counts.

Advanced BMS Safety Features

Rest easy knowing your power system is protected with the EcoStore 200’s Advanced BMS safety features. Designed to prevent overcharging, overheating, short circuits, and much more. Our BMS ensures safe and reliable operation under all conditions.

IP67 Water and Dust Resistance

The EcoStore 200 is engineered for all-weather performance, featuring an IP67 rating that guarantees protection from dust and water. Whether you're dealing with rain, mud, or dust, this battery is ready to go wherever your adventures take you.