03 7033 1019
Great reasons to buy from us:
-
Local Support
Australian Support -
Orders Shipped
Shipped Within 24 Hours -
Save In Bulk
Save In Created Packs -
Free shipping
Free shipping (when you spend over $500* Excludes bulky items)
A MultiPlus, plus ESS (Energy Storage System) functionality:
The MultiPlus-II is a multifunctional inverter/charger with all the features of the MultiPlus, plus an external current sensor option which extends the PowerControl and PowerAssist function to 50A resp. 100A.
The MultiPlus-II is ideally suited for professional marine, yachting, vehicle and land based off-grid applications. It also has built-in anti-islanding functionality, and an increasingly long list of country approvals for ESS application.
Several system configurations are possible. For more detailed information see the ESS Design and configuration manual.
PowerControl and PowerAssist - Boosting the capacity of the grid or a generator:
A maximum grid or generator current can be set. The MultiPlus-II will then take account of other AC loads and use whatever is extra for battery charging, thus preventing the generator or grid from being overloaded (PowerControl function).
PowerAssist takes the principle of PowerControl to a further dimension. Where peak power is so often required only for a limited period, the MultiPlus-II will compensate insufficient generator, shore or grid power with power from the battery.
When the load reduces, the spare power is used to recharge the battery.
Solar energy: AC power available even during a grid failure:
The MultiPlus-II can be used in off grid as well as grid connected PV and other alternative energy systems. It is compatible with both solar charger controllers and grid-tie inverters.
Two AC Outputs:
The main output has no break functionality. The MultiPlus-II takes over the supply to the connected loads in the event of a grid failure or when shore/generator power is disconnected. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. The second output is live only when AC is available on the input of the MultiPlus-II. Loads that should not discharge the battery, like a water heater for example, can be connected to this output.
Virtually unlimited power thanks to parallel (not for the 8k, 10k and 15k models) and three phase operation:
Up to 6 Multis can operate in parallel to achieve higher power output. Six 48/5000/70 units, for example, will provide 25 kW / 30 kVA output power with 420 Amps charging capacity.
In addition to parallel connection, three units of the same model can be configured for three phase output. But that’s not all: up to 6 sets of three units can be parallel connected for a 75 kW / 90 kVA inverter and more than 1200 Amps charging capacity.
On-site system configuring, monitoring and control:
Settings can be changed in a matter of minutes with VEConfigure software (computer or laptop and MK3-USB interface needed). Several monitoring and control options are available: Cerbo GX, Color Control GX, Venus GX, Octo GX, CANvu GX, laptop, computer, Bluetooth (with the optional VE.Bus Smart dongle), Battery Monitor, Digital Multi Control Panel.
Remote configuring and monitoring:
Install a Cerbo GX or other GX product to connect to the internet.
Operational data can be stored and displayed on our VRM (Victron Remote Management) website, free of charge.
When connected to the internet, systems can be accessed remotely, and settings can be changed.
This package comes supplied with:
- 12V 5000VA 220A Inverter Charger
Specifications
| Quattro | 24/8000/200-100/100 |
|---|---|
| PowerControl / PowerAssist | Yes |
| Integrated transfer switch (A) | Yes |
| AC Inputs (2x) | Input voltage range: 187-265 VAC Input frequency: 45 – 65 Hz Power factor: 1 |
| Maximum feed through current (A) | 2x100 |
| Inverter | |
| Input voltage range (V DC) | 19 – 33V |
| Output (1) | Output voltage: 230 VAC ± 2% Frequency: 50 Hz ± 0.1% |
| Cont. output power at 25°C (VA) (3) | 8000 |
| Cont. output power at 25°C (W) | 6400 |
| Cont. output power at 40°C (W) | 5500 |
| Peak power (W) | 16000 |
| Maximum efficiency (%) | 94 |
| Zero load power (W) | 60 |
| Zero load power in AES mode (W) | 40 |
| Zero load power in Search mode (W) | 15 |
| Charger | |
| Charge voltage 'absorption' (V DC) | 28.8 (adjustable) |
| Charge voltage 'float' (V DC) | 27.6 (adjustable) |
| Storage mode (V DC) | 26.4 |
| Charge current house battery (A) (4) | 200 |
| Charge current starter battery (A) | 4 |
| Battery temperature sensor | Yes |
| General | |
| Auxiliary output (A) (5) | 50 |
| Programmable relay (6) | 3x |
| Protection (2) | a-g |
| VE.Bus communication port | For parallel and three phase operation, remote monitoring and system integration |
| General purpose com. port | 2x |
| Remote on/off | Yes |
| Common Characteristics | Operating Temp.: -40C to 65C. Humidity (non-condensing): max. 95% |
| Maximum altitude | 3500 m |
| Enclosure | |
| Material & Colour: | Protection category: IP 21 Aluminium (blue RAL 5012) |
| Battery-connection | Four Bolts M8 (2x Plus & 2x Minus) |
| 230 V AC-connection | Bolts M6 |
| Weight (kg) | 45 |
| Dimensions hxwxd in mm | 470 x 350 x 280 |
| Standards | |
| Safety | EN-IEC 60335-1, EN-IEC 60335-2-29, EN-IEC 62109-1 |
| Emission, Immunity | Road and urban environments: ECE R10-4 |
| Road Vehicles | ECE R10-4 N/A |
1) Can be adjusted to 60 Hz.
2) Protection key:
a) output short circuit
b) overload
c) battery voltage too high
d) battery voltage too low
e) inverter over temperature
f) 230 VAC on inverter output
g) input voltage ripple too high
3) Non-linear load, crest factor 3:1
4) At 25°C ambient
5) Switches off when no external AC source available
6) Programmable relay that can a.o. be set to for general alarm,
DC under voltage or genset start/stop function
AC Rating: 230V / 4A
DC Rating: 4A Up to 35VDC, 1A Up to 60VDC
| SKU | Vic-QUA248020010 |
| Barcode # | 8719076024194 |
| MPN # | QUA248020010 |
Related Products
