03 7033 1019
Great reasons to buy from us:
-
Local Support
Australian Support -
Orders Shipped
Shipped Within 24 Hours -
Save In Bulk
Save In Created Packs -
Free shipping
Free shipping (when you spend over $500* Excludes bulky items)
- >2500 Charge Cycles @ 80% DOD
- Bluetooth Monitoring via Phone App
- Built-In Reset Button making re-starting a flat battery a breeze
Features
Enerdrive | Dometic B-TEC LiFeP04 12v 100Ah Slimline Lithium Battery
This B-TEC lithium battery is designed and intended for use in deep cycle applications where a single battery is required that meets the amp hour capacity.
Smart Phone Monitoring System
The Enerdrive B-TEC Slimline battery incorporates wireless Battery Monitoring Technology. By downloading the Android™ or Apple® app to your smartphone or tablet device, you can monitor the following information;
- Battery Capacity
- Battery Voltage
- Battery Current (Amps)
- Battery State of Charge (SOC)
- Battery State of Health (SOH)
- Battery Status
- Individual Cell Voltage
- Battery Temperature
- Battery Cycles
- Battery Alarms
- Battery Event Information
Battery Management System
The battery is also equipped with an internal Battery Management System that can monitor and optimise each Prismatic cell within the battery during normal operation. It will protect the battery pack from over charge, over discharge, over temperature & short circuit. The BMS helps to ensure safe and accurate operation of the battery. Please note that a fully discharged battery (BMS is off) requires charging within 14 days to avoid cell damage.
Size & Weight Savings
Lithium v AGM Capacities;
- 100Ah Lithium = 160Ah AGM
- 125Ah Lithium = 200Ah AGM
- 200Ah Lithium = 320Ah AGM
- 300Ah Lithium = 480Ah AGM
(Based on standard depth of discharge for both Lithium (80%) and AGM (50%).
The Enerdrive B-TEC battery provides 60% more usable power than its equivalent lead acid cousin and being nearly 50% lighter and 30% smaller makes for a superior alternative.
The Enerdrive B-TEC Slimline battery is perfect for camper trailers, 4WD’s (AUX battery), caravans, small water craft, low power communication sites or any other application that requires the use of a single deep cycle battery that meets the amp hour capacity.
With over a decade of researching, designing and testing lithium batteries and the associated charging systems, Enerdrive are at the forefront of lithium battery systems in Australia. Enerdrive are the only Australian company that can supply a fully integrated self-branded energy system to suit your setup.
With thousands of complete systems in operation Australia wide, Enerdrive | Dometic is regarded as the leader in the field of lithium batteries and energy systems for Mobile, Marine and Remote applications.
Please Note; The B-TEC Slimline battery is capable to be paralleled to a second B-TEC battery of the same size. For maximum performance and lifespan of your B-TEC Slimline battery, no more than 2 batteries should be connected together to increase your overall capacity. Overall loads when paralleled should not exceed the current limits of a single battery’s BMS.
The 100Ah Slimline battery is able to accept a maximum inverter capacity of 1000W only. Exceeding the maximum inverter capacity can damage the BMS Management within the battery.
If you are requiring a battery system larger than Enerdrive B-TEC battery, please look at the Enerdrive Pro Series Power Pack Systems which can offer multiple parallel and series connections with Active Cell Balancing Protection across the entire pack.
Please note B-TEC batteries must not be installed –
• In vehicle engine bays or in high heat environments, refer to Section 10 – Battery Specifications of the manual.
• In wet areas such as caravan chassis mounts, open ute trays or boat deck areas.
• Inside compartments dedicated to carrying gas.This product is not suitable to mount anywhere with a possibility of being exposed to the elements. It is an electronic product designed for internal use ONLY.
2023 Standards Update: With some confusion regarding the up coming standards changes and how they will effect battery fitments for future builds including upgrades to existing builds, ENERDRIVE | DOMETIC have created a fitment guide. This guide is specific to our e-LITE and B-TEC range of batteries and has been designed to cover all portions of the battery installation requirements within the new standard. Please note this guide is specific to Enerdrive batteries and does not apply to any other manufacturer.
SKU EPL-100BT-12V-SLIM EPL-100BT-12V-G2 EPL-125BT-12V G2 EPL-200BT-12V G2 EPL-300BT-12V G2 Nominal Voltage 12.8V 12.8V 12.8V 12.8V 12.8V Nominal Capacity 100Ah 100Ah 125Ah 200Ah 300Ah Charge Cycles (DOD – 80% under controlled conditions) >2500 Cycles >2500 Cycles >2500 Cycles >2500 Cycles >2500 Cycles Standard Charge Specification (Lithium profile charger required) Battery Charge Temperature 0 ̴ 45°C 0 ̴ 45°C 0 ̴ 45°C 0 ̴ 45°C 0 ̴ 45°C Normal Charge Voltage CV/CC* 14.20 ̴ 14.60V 14.20 ̴ 14.60V 14.20 ̴ 14.60V 14.20 ̴ 14.60V 14.20 ̴ 14.60V Standby (Float) Voltage 13.50 ̴ 13.80V 13.50 ̴ 13.80V 13.50 ̴ 13.80V 13.50 ̴ 13.80V 13.50 ̴ 13.80V Maximum Charge Current 80A @ 25˚C for 30mins 60A @ 25°C for 30mins 60A @ 25°C for 30mins 150A @ 25°C for 30mins 190A @ 25°C for 30mins Recommended Charge Current
For Maximum Life, Charge in the lower amperage range20~50A 20~60A
20~60A
40~100A 60~120A Standard Discharge Specification Battery Discharge Temperature -20 ̴ 60°C -20 ̴ 60°C -20 ̴ 60°C -20 ̴ 60°C -20 ̴ 60°C Battery Output Voltage Range 11.00 ̴ 14.60V 11.00 ̴ 14.60V 11.00 ̴ 14.60V 11.00 ̴ 14.60V 11.00 ̴ 14.60V Maximum Discharge/Pulse Current 100A @ 25˚C ±5˚C for 30 mins 100A @ 25˚C ±5˚C for 30 mins 100A @ 25˚C ±5˚C for 30 mins 200A @ 25˚C ±5˚C for 30 mins 250A @ 25˚C ±5˚C for 15 mins Pulse Discharge Current 250A for 1.0s 450A for 1.0s 450A for 1.0s 450A for 1.0s 450A for 1.0s Discharge Cut-off Voltage <11.20V <11.20V <11.20V <11.20V <11.20V Circuit Protection The battery is supplied with a LiFePO4 Battery Management System BMS that can monitor and optimize each single prismatic cell during charge & discharge, to protect the battery pack from overcharge, over discharge & short circuit. Overall, the BMS helps to ensure safe and accurate operation of the battery. The battery is supplied with a LiFePO4 Battery Management System BMS that can monitor and optimize each single prismatic cell during charge & discharge, to protect the battery pack from overcharge, over discharge & short circuit. Overall, the BMS helps to ensure safe and accurate operation of the battery. The battery is supplied with a LiFePO4 Battery Management System BMS that can monitor and optimize each single prismatic cell during charge & discharge, to protect the battery pack from overcharge, over discharge & short circuit. Overall, the BMS helps to ensure safe and accurate operation of the battery. The battery is supplied with a LiFePO4 Battery Management System BMS that can monitor and optimize each single prismatic cell during charge & discharge, to protect the battery pack from overcharge, over discharge & short circuit. Overall, the BMS helps to ensure safe and accurate operation of the battery. The battery is supplied with a LiFePO4 Battery Management System BMS that can monitor and optimize each single prismatic cell during charge & discharge, to protect the battery pack from overcharge, over discharge & short circuit. Overall, the BMS helps to ensure safe and accurate operation of the battery. Over-Charge Protection Over-charge Protection Per Cell 3.90V ± 0.03V 3.90V ± 0.03V 3.90V ± 0.03V 3.90V ± 0.03V 3.90V ± 0.03V Over-charge Release Per Cell 3.60V ± 0.05V 3.60V ± 0.05V 3.60V ± 0.05V 3.60V ± 0.05V 3.60V ± 0.05V Over-charge Release Method Discharge below release voltage Discharge below release voltage Discharge below release voltage Discharge below release voltage Discharge below release voltage Over-Discharge Protection Over-discharge Protection Per Cell 2.80V ± 0.05V 2.80V ± 0.05V 2.80V ± 0.05V 2.80V ± 0.05V 2.80V ± 0.05V Over-discharge Release Per Cell 3.20V ± 0.05V 3.20V ± 0.05V 3.20V ± 0.05V 3.20V ± 0.05V 3.20V ± 0.05V Over-discharge Release Method Apply Charge/Voltage >12.8V Apply Charge/Voltage >12.8V Apply Charge/Voltage >12.8V Apply Charge/Voltage >12.8V Apply Charge/Voltage >12.8V Battery Manual Reset Button No Yes Yes Yes Yes Over Current Protection Discharge Over Current 110A for 30s – 450A for 1s 110A for 30s – 450A for 1s 110A for 30s – 450A for 1s 220A for 30s – 450A for 1s 280A for 25s – 400A for 3.5s Protection Reset Time Approx 10s Auto Release Approx 10s Auto Release Approx 10s Auto Release Approx 10s Auto Release Approx 10s Auto Release Over Current Release Method Disconnect Load Disconnect Load Disconnect Load Disconnect Load Disconnect Load Over Temperature Protection Battery Discharge Over Temperature Protection to 65°C ± 5°C Protection to 65°C ± 5°C Protection to 65°C ± 5°C Protection to 65°C ± 5°C Protection to 65°C ± 5°C Release at 50°C ± 5°C Release at 50°C ± 5°C Release at 50°C ± 5°C Release at 50°C ± 5°C Release at 50°C ± 5°C Battery Charge Over Temperature Protection to 55°C ± 5°C Protection to 55°C ± 5°C Protection to 55°C ± 5°C Protection to 55°C ± 5°C Protection to 55°C ± 5°C Release at 45°C ± 5°C Release at 45°C ± 5°C Release at 45°C ± 5°C Release at 45°C ± 5°C Release at 45°C ± 5°C Short Circuit Protection Auto release after 5s Auto release after 5s Auto release after 5s Auto release after 5s Auto release after 5s Dimensions Length 551mm 318mm 318mm 505mm 521mm Width 110mm 165mm 165mm 172.5mm 280mm Height 240mm 232mm 232mm 265mm 238mm Weight Approx 12.5 Kg Approx 12.6kg Approx 15.5 Kg Approx 25.0 Kg Approx 38.2 Kg Case Construction High Impact ABS Plastic High Impact ABS Plastic High Impact ABS Plastic High Impact ABS Plastic High Impact ABS Plastic Storage Information Temperature & Humidity Range <30 days -20°C ̴ 60°C, 5 ̴ 75% RH <30 days -20°C ̴ 60°C, 5 ̴ 75% RH <30 days -20°C ̴ 60°C, 5 ̴ 75% RH <30 days -20°C ̴ 60°C, 5 ̴ 75% RH <30 days -20°C ̴ 60°C, 5 ̴ 75% RH >90 days -10°C ̴ 45°C, 5 ̴ 75% RH >90 days -10°C ̴ 45°C, 5 ̴ 75% RH >90 days -10°C ̴ 45°C, 5 ̴ 75% RH >90 days -10°C ̴ 45°C, 5 ̴ 75% RH >90 days -10°C ̴ 45°C, 5 ̴ 75% RH Warranty 5 Years 5 Years 5 Years 5 Years 5 Years -
Downloads
Download the B-Tec Battery Monitor App
Related Products
